2022 RailKing O Gauge Tank Cars Announced
August 2, 2022 - M.T.H. Electric Trains will be releasing a series of 2022 RailKing O Gauge Tank Cars in four unique paint schemes beginning this Winter. Each of these unique schemes will be available in limited production quantities and will begin shipping to M.T.H. Authorized Retailers in January 2023.
The tank car was relatively uncommon until the 1870s, when the nascent petroleum industry ordered large quantities of metal tanks carried on wooden car bodies. By the early 1900s, a standard design had evolved that lasted throughout the steam and early diesel eras: an 8,000-11,000 gallon metal tank perched on a metal flatcar-like underframe.
The one big change during that time was the transition from riveted to welded construction beginning in the late 1930s. Car builders introduced X-ray inspection of welds to ensure safety, as well as giant annealing ovens that could heat-treat assembled tanks to relieve joint stress. Welded tanks were stronger, less susceptible to rust and corrosion, and less likely to rupture in the event of a wreck.
Our model represents a typical all-welded, insulated tank car built in the late 1940s or 1950s. A layer of insulation protected cargos that were sensitive to temperature extremes, and some such cars also had heating coils under their outer layer. Our model also features a safety platform around the dome — insulation and safety platforms being features commonly found on cars used in the chemical industry.
Check out each of the M.T.H. offerings in the list on the left.
CUSTOM RUN TANK CAR OFFERINGS
In addition to the M.T.H. releases, you can find all the 2022 Custom Run models of the RailKing Tank Car that M.T.H. is producing for M.T.H. Authorized Retailers by going HERE.
- Intricately Detailed, Durable ABS Body
- Die-Cast Metal Chassis
- Metal Wheels and Axles
- Die-Cast 4-Wheel Trucks
- Operating Die-Cast Metal Couplers
- Decorative Brake Wheels
- Separate Metal Handrails
- Fast-Angle Wheel Sets
- Needle-Point Axles
- Unit Measures: 10 3/8” x 2 3/8” 3 13/16”
- Operates On O-27 Curves